Interfaces 2017-12-22T17:13:18+00:00

Interfaces

These are devices that allow you to wirelessly interface control devices or the app with individual utilities directly or indirectly. Directly by controlling traditional lighting fixtures or LEDs through phase dimmer or DALI or 0-10V

Indirectly using a universal multi-voltage, plug-in interface.

Schemino XXXXX

cod. Aria.DD

PLH Aria Dimmer Dali * | 0-10V | 1-10V

Compact dimmer module, dimensions 56.5 x 35.8 x 22.3 mm, IP20, for analogue power supply 0-10V | 1-10V or DALI * digital (with RGB or Tuneble White control). The firmware selection according to the type of power supply is made at the time of installation and can be reset at any time.

Programming and configuration through the free downloadable app from the following address.

Control via PLH Aria, Smartphone, Tablet and Smartwatch controls.

The dimmer module must be installed by trained staff directly on the luminaire or on the part of the system.

* the management of the DALI digital feeder is intended as a single object if not inserted in a DALI network

Istruzioni di montaggio

Immagini in HR

Scheda tecnica

Pagina di download

cod. Aria.D

PLH Aria Dimmer

Compact dimmer module, dimensions 40.4 x 36.3 x 14.0 mm with Trailing Edge Technology for Network Voltage (230V AC – 110V AC) Light Source in Incandescent Technology, Halogen (up to 150W) or LED (up to to 50W minimum 1W). The selection of the dimming curve, i.e. the firmware according to the type of light source (halogen, incandescent or led) is made at the time of installation and can be reset at any time.

Programming and configuration through the free downloadable app from the following address.

Control via PLH Air, Smartphone, Tablet and Smartwatch controls.

The dimmer module must be installed by trained staff directly on the luminaire or on the part of the system.

Istruzioni di montaggio

Immagini in HR

Scheda tecnica

Pagina di download

cod. Aria.Jellyfish

PLH In/Out Interface

Universal interface 4 inputs and 4 outputs of xxxx x xxxxxx x xxxxx mm size with wireless or wired multitasking: battery; 12 to 35V DC and 230V AC. Optical signaling of input and output features, IP67 cases.

Possibility of connecting inputs such as clean buttons or contacts or outputs (maximum 29V DC – 100mA tightening voltage)

Programming and configuration through the free downloadable app from the following address.

Command outputs via PLH Aria, Smartphone, Tablet and Smartwatch commands.

The module must be installed by trained staff.

Istruzioni di montaggio

Immagini in HR

Scheda tecnica

Pagina di download